Calliper piston diameter: 32 mm (1.26 in).
Number of pistons per calliper: 4.
Front brake type: M4.32 B (4x32).
Friction material: TT-2182-FF.
Brake master cylinder type: radial.
Cylinder Ø: 18 mm (0.71 in).
REAR
With fixed drilled steel disc.
Disc diameter: 265 mm (10.43 in).
Rear brake disc thickness: 6 mm (0.24 in)
Disc thickness (maximum wear): 5.4 mm (0.21 in).
Braking 201 cm
2
(31.15 in
2
).
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Floating calliper with 2 pistons with 28 mm (1.10 in)
diameter.
Friction material: TT 2182 FF.
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the area with abundant running water.
Transmission
Hydraulically-controlled slipper self-servo wet
multiplate clutch.
Drive is from engine to gearbox primary
via spur gears, 1.844:1 ratio.
Front chain sprocket/clutch gearwheel ratio: 32/59.
6-gear gearbox with Ducati Quick (DQS) up/
down EVO.
Gearbox output sprocket/rear chain sprocket ratio:
15/40.
Total gear ratios:
1
st
gear 38/13
2
nd
gear 35/17
3
rd
gear 32/30
4
th
gear 29/22
5
th
gear 24/21
6
th
gear 26/25
Drive chain from gearbox to rear wheel.
Make: REGINA 520 ZRDK.
Links: 110 open.
309
To Next Page
Loading...
