The table below lists the items available in the Rally Infomode.
no. Description
1 Speed
It is displayed increased by 5% and together with the set unit of measurement (km/h or mph).
2 Riding Mode in use
3 Gear
4 Rev counter
5 Trip master
6 Clock
It is possible to set it through the “Date and time” function in the - Display” menu.
7 Engine Coolant temperature (°C or °F)
The temperature display range goes from +40°C to +110°C (+104°F ÷ +230°F).
When the temperature is lower than +40°C (+104°F), the “Low” message is displayed.
When the temperature is higher than +110°C (+230°F), the flashing “High” red message is displayed.
In case of overheating, if possible, it is recommended to ride at reduced speed to allow the
cooling system to lower the engine temperature. If this is not possible due to conditions, stop
and turn the engine
If the motorcycle continues to be used when the engine is overheated, severe damage may occur.
When the engine temperature returns to normal, continue riding by frequently checking the in‐
strument panel indication.
124
To Next Page
Loading...
