The ABS OFF level can only be activated by
means of the “Temporary ABS system deactivation”
function available only in the Rally Infomode and can
only be activated with Enduro Riding Mode.
ABS OFF level can only be selected with the
motorcycle at a standstill. It is not possible to set this
level while riding.
ABS will be automatically re-enabled upon every
key-on, even though it was disabled during the
previous use.
Tips on how to select the intervention level
The choice of the correct level mainly depends on
the following parameters:
1) The tyre/road grip (type of tyre, amount of tyre
wear, the road/track weather
conditions, etc.).
2) The rider's experience and sensitivity.
Selecting level 3 of the ABS will ensure a very stable
braking thanks to control, which prevents the
rear wheel allowing the motorcycle to keep a
good alignment during the whole braking action.
This level features active cornering function which,
with vehicle leaning over, prevents wheel lock-up
and skidding as much as possible, within the physical
limits allowed by the vehicle and by the road
conditions.
Selecting level 2, the ABS will privilege more the
braking power than stability. This levels provides the
cornering feature. This level also features the
control, but it only controls the angle and speed of
rear wheel without preventing it altogether.
ABS level 1 is specific for use and ABS is
active only on the front wheel to help braking
on roads. In this level there is no
control nor cornering feature.
205
To Next Page
Loading...
