This function allows the intervention level of
the DTC or deactivating it.
●
Enter the menu.
●
Use
and to select the
“Advanced” item and press the .
●
Select the “Riding Mode setup” item and press
the
●
Select the Riding Mode you wish to customise
and press
.
●
Select the “DTC” item and press
.
The available levels are displayed, the motorbike is
also shown with the involved in the
highlighted followed by the reference indications
and the currently set level.
At the top of the screen page is the path of the
parameter being set.
Note
The selection of intervention levels is limited
according to the Riding Mode selected via the
instrument panel, due to the conditions of use to
which each Riding Mode refers. The following are the
levels that can be selected in the Riding
Modes.
ABS
DWC
EBC
DTC
Power mode
3
Current
Close
Back
... Spor setup
120
°C
09:09
am
N
Gear
Fig 170
Current
Close
Back
... Spor Traction Control (DTC)
120
°C
09:09
am
N
Gear
Fig 171
207