the gear sensor. The system works in a way
when and
Here below are some tips that will ensure you
properly exploit this feature:
●
The Ducati Quick takes the same lever
operation as with vehicle not equipped with the
Ducati Quick Ducati Quick is not
designed for automatically.
●
For any gear request (up or down) the rider
has to move the lever from its idle position
in the desired direction through a over-
travel, then keep the lever in this position
until the gear is completed. Once the
has been completed, the lever has to
be fully released in order to allow another
acted by Ducati Quick If the rider
does not move the lever up to end stroke
during a Ducati Quick request, gears may
not be fully engaged.
●
Ducati Quick provides no assistance for the
if the rider uses the clutch lever: the
Ducati Quick does not work when the
clutch lever is pulled.
●
If the Ducati Quick strategy does not work
it is always possible to complete the gear
using the clutch lever.
●
Ducati Quick is designed to operate above
2,000 rpm.
●
No the gear engaged, with
Ducati Quick only woks below a set
threshold, so as to avoid exceeding the
maximum rpm allowed when the lower gear is
engaged.
225
To Next Page
Loading...
