The headlight might fog up due to washing,
rain or moisture. Switch headlight on for a time
to help and dry up any condensate.
Carefully clean the phonic wheels of the ABS in order
to ensure system Do not use aggressive
products in order to avoid damaging the phonic
wheels and the sensors.
Avoid direct contact between instrument panel
lens and oils/fuels that may stain or damage it
thereby impairing information readability. To clean
such do not use alcohol-based detergents,
containing solvent or abrasive agents; do not use
sponges or cloths featuring hard or rough areas since
they might scratch the
Note
Clean instrument panel lens using cloths
with water and mild soap or detergents specific for
cleaning clear plastic
Note
To clean the instrument panel do not use
alcohol or its by-products.
Pay special when cleaning the wheel rims
since they have in machined aluminium; clean
and dry them every time you use the vehicle.
To clean and lubricate the drive chain, refer to
the paragraph “Lubricating the drive chain”.
Composite components, structural
components designed for high-temperature
applications (e.g. swinging arm), are by their very
nature subject to matrix colour changes due to time,
exposure to atmospheric agents and/or heat
sources. Such components can therefore change
their colouring and/or general appearance over time
and such changes are not an indication of non-
conformity or degradation of the material and/or
product and/or component, nor can such a change
be considered an aesthetic defect (being a peculiar
characteristic of the material), nor a structural defect
(as in no way it compromises the functionality of the
component).
293
To Next Page
Loading...
