Ducati MULTISTRADA V2 - Page 72

completely anticlockwise, to obtain fully
uncompressed position.
From this position, adjust the spring preload by
turning the adjuster clockwise.
Every turn corresponds to 1 mm (0.04 in) of spring
preload.
STANDARD  are as follows:
●
Compression on LH fork leg: -3 ± 1/4 turns from
fully closed;
●
Rebound on RH fork leg: -1.5 ± 1/4 turns from
fully closed;
●
Preload: +5 ± 1/4 turns from fully unloaded;
 range:
●
Compression and rebound: 4 full turns;
●
Preload: 10 mm (0.39 in).

Adjust both fork leg preload adjusters to the
same 
71