Duplo DSC-10/20 User Manual

2-3
Chapter 2 Basic Operation
1
Select the MODE menu.
2
Set the Paper Eject Direction to right
side (
) or left side ( ).
Select right side ejection when ejecting pa-
per to the stacker and left side ejection when
ejecting paper to the downstream unit.
2-3. Setting the Block Mode
What Is the Block Mode?
If paper feed bins have been divided into two or four blocks and the number of sheets required for colla-
tion has been loaded in each block, operations are sequentially carried out from block No. 1 to No. 2 or No. 4,
and returned to No. 1 again.
By constantly replenishing paper in blocks currently not operating, operations can be continued ecient-
ly without stopping.
In each block, stack the same number of sheets of paper required for the sets to be collated (paper type
and number of sets).
• When using one collator • When using two collators
Block Mode1/2
No.1
No.2
Block Mode1/4
No.4
No.3
Block Mode1/2
No.2
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No.1
No.2
No.1

Duplo DSC-10/20 Specifications

General

Brand	Duplo
Model	DSC-10/20
Category	Printer
Language	English