4-1
Chapter 4 Daily Cleaning
Chapter 4 Daily Cleaning
1. Cleaning Parts
• Before cleaning the machine, make sure to turn off the power and remove the power cord
from wall outlet.
• Clean up the conveyance belt and conveyance roller every day.
• Before turning on the power again, confirm that the cleaned parts are dry completely.
1-1. Suction Belt
1
Clean the suction belt by turning the shaft with the hand.
Wipe o stain or paper dust on the belt using soft cloth moistened with water or alcohol.
(For North America)
(For North America,EU)
(For North America)
(For North America,EU)
1-2 Conveyance Belt
1
Clean the conveyance belt by drawing it
with the hand.
Wipe o stain or paper dust on the belt using
soft cloth moistened with water or alcohol.
To Next Page
Loading...
