Select flap side
The sewing length is equipped with a reflecting light barrier for the
recognition of the seam start and end when sewing with flaps.
The parameter indicates which side the flap is attached.
When the parameter is changed the flap side of the seam pattern
automatically switches in the display.
Flap left
Flap right
Seam-start mode left/right needle
Four different seam locks are available for the seam start. They can
be set separately for the right and left needles.
Single bartack
Stitch compaction
Number of bartack stitches
Entry: 01 … 05 [stitches]
Number of stitch-compaction stitches
Entry: 01 … 10 [stitches]
Stitch-compaction stitch length / or bartack
Entry: 0.5 … 3.0 [mm]
18
To Next Page
Loading...
Need help?
General
