6.6 Pocket sequence ( )
This menu item is used to assemble individual pocket programs into
callable sequences.
A total of 20 independent pocket sequences are available.
Each pocket sequence can consist of up to 8 pocket programs in any
order.
Info line:
Sequence programming
Programming a pocket sequence
–
When the main screen is displayed press function key F2.
The display switches to the pocket-sequence screen.
–
Move the cursor to the required pocket sequence w ith the “ ñ”or
“ò”keys.
The number of the selected pocket sequence appears in reverse
video.
–
Programming a pocket sequence.
Enter the numbers (01 ...99) of the r equired pocket programs one
after another using the decimal keypad.
Single-digit pocket-program numbers must be preceded by a zero.
Once the eighth pocket program has been entered the programmed
pocket sequence is automatically stored.
–
Press the “OK”key
to store the pocket sequence.
Pressing the “ESC” key during programming restores the old
pocket sequence.
–
Press function key F1.
The display switches back to the main screen.
Sw itching automatic pocket-program sequencing on/off
If this function is switched on, when one pocket program has been
completed the controller automatically moves to the next pocket
program in the sequence.
–
Automatic pocket-program sequencing is switched on and off by
pressing function key F5.
Automatic sequencing is indicated in the display by arrows
between the individual pocket programs of the sequence.
36
To Next Page
Loading...
Need help?
General
