6.4 Pocket programs ( )
This menu item contains the parameters for programming the various
pocket programs.
They are used to program the seam and its associated additional
functions.
Info line:
Select pocket program
–
While the main screen is displayed press function key F1.
The display switches to the pocket-program screen.
–
The pocket program currently selected is shown in the upper part
of the display (e.g. “PP : 01”).
The program name, if any, appears behind it (e.g. “<SAKKO>”).
–
Select the required parameter with cursor keys “ï”or“ð”.
A black box appears under the symbol of the selected parameter.
–
Change the selected parameter as described in section 4.2.
–
Press function key F1 to switch back to the main screen.
Pocket-program number
This parameter selects the pocket program that is to be changed.
On completion of the entry the new pocket program and its program
name appear in the top left-hand corner of the display.
Entry: 1 .. 99
14
To Next Page
Loading...
Need help?
General
