DURKOPP ADLER 745-34-2 Programming Instructions

7.3.7 Checking the tape feed
This program tests the feed and trimming function of the tape feed
Info line:
Checking tape feed
–
Press OK to run the test program.
–
Press function key F4.
The tape feed starts.
The tape is fed and the brake released.
The key is blocked.
–
Press function key F5.
The tape is automatically cut, advanced and clamped.
–
Press function key F1 to leave the test program.
65
4

DURKOPP ADLER 745-34-2 Specifications

General

Brand	DURKOPP ADLER
Model	745-34-2
Category	Sewing Machine
Language	English