DURKOPP ADLER 745-34-2 Programming Instructions

8. Error messages
In the event of an error in the control system or the machine program
the error number appears in the display.
The following tables will enable the cause of the error to be identified
and remedied.
8.1 Sewing motor controller error messages
Error number Meaning Remedy
Error 1051 Sewing motor timeout
- Faulty cable to the sewing motor
reference switch
- Faulty reference switch
- Replace the cable
- Replace the reference switch
Error 1052 Sewing motor excess current
- Faulty sewing motor cable
- Faulty sewing motor
- Faulty control
- Replace the sewing motor cable
- Replace the sewing motor
- Replace the control
Error 1053 Too high mains voltage
Check the mains voltage
Error 1055 Sewing motor overload
- Sewing motor blocked / seized up
- Faulty sewing motor
- Control faulty
- Eliminate the blocking / seizing
- Replace the sewing motor
- Replace the control
Error 1056 Sewing motor overheat
- Sewing motor seized up
- Faulty sewing motor
- Faulty control
- Eliminate seizing
- Replace sewing motor
Replace control
Error 1058 - Sewing motor speed
- Faulty sewing motor
- Replace sewing motor
Error 1062 - Failure sewing motor IDMA
Autoincrement
- Switch the machine off/on again
Error 1302
Error 1342
-
Error 1344
Sewing motor error
- Control receives no impulse from
the impulse transmitter in the motor
Sewing motor error
Internal error
- Check the cable from the impulse
transmitter in the motor to the control
- Switch the machine off/on again
- Software update
- Inform the DA-Service
88

DURKOPP ADLER 745-34-2 Specifications

General

Brand	DURKOPP ADLER
Model	745-34-2
Category	Sewing Machine
Language	English