DURKOPP ADLER 745-34-2 Programming Instructions

7.4 MULTITEST system ( + or main switch on + )
The MULTITEST system programs enable input and output elements to
be tested quickly.
No additional instruments are required.
–
Press and hold down key “F3”.
–
Press the “RST”key.
The controller is re-initialized and the MULTITEST system screen
is loaded.
–
Select the required test program with cursor keys “ï”or“ð”.
A black background appears behind the symbol.
–
Press “OK” to run the selected test program.
72

DURKOPP ADLER 745-34-2 Specifications

General

Brand	DURKOPP ADLER
Model	745-34-2
Category	Sewing Machine
Language	English