DURKOPP ADLER 745-34-2 Programming Instructions

–
The key for the required setting or test program should be pressed
and held down.
–
Turn on the main switch.
The controller is initialized.
The DÜRKOPP-ADLER logo briefly appears in the display.
The display switches to the corresponding group of setting and test
programs.
or
–
Press the “RST”key.
–
Press and hold down the key for the required setting or test
program.
39
4

DURKOPP ADLER 745-34-2 Specifications

General

Brand	DURKOPP ADLER
Model	745-34-2
Category	Sewing Machine
Language	English