Working basis
Service Instructions 667 - 00.0 - 04/2016 9
3 Working basis
3.1 Order of the settings
The setting positions for the sewing machine are interdependent.
Always comply with the order of individual setting steps as specified.
It is absolutely essential that you follow all notices regarding prerequisites
and subsequent settings that are marked with in the margin.
3.2 Cable routing
Ensure that all cables are laid in the machine such that the function of
moving parts is not hampered.
1. Lay any excess cabling neatly in proper cable snakes.
2. Bind together the cable loops with cable ties.
Tie loops wherever possible to fixed parts.
The cables must be secured firmly.
3. Cut off the extending ends of cable ties.
NOTICE
Property damage may occur!
Risk of machine damage from incorrect order.
It is essential to follow the working order specified in these instructions.
NOTICE
Property damage may occur!
Machine damage and malfunctions can be caused by laying the
cables incorrectly.
Lay excess cabling in such a way that moving parts are not impaired
in their ability to function correctly.
To Next Page
Loading...
Need help?
General
