Maintenance
82 Service Instructions 667 - 00.0 - 04/2016
16.4 Servicing specific components
Checking the toothed belt
The condition of the toothed belt must be checked once a month.
Important
A damaged toothed belt must be replaced immediately.
Proper setting
• The toothed belt exhibits no cracks or fragile areas
• When pressed with a finger, the toothed belt must yield no more than
10 mm.
16.5 Parts list
A parts list can be ordered from Dürkopp Adler. Or visit our website for fur-
ther information at:
www.duerkopp-adler.com
WARNING
Risk of injury!
Crushing injuries from moving parts.
Before checking the condition of the toothed belt,
switch off the machine at the main switch.
To Next Page
Loading...
