Maintenance
74 Service Instructions 667 - 00.0 - 04/2016
16.1 Cleaning
16.1.1 Cleaning the machine
Lint and thread remnants should be removed after every 8 operating hours
using a compressed air gun or a brush. If very fluffy sewing material is be-
ing sewn the machine must be cleaned more frequently.
WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Lint and thread remnants can impair the operation of the machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
To Next Page
Loading...
Need help?
General
