Operation
4812160801_D.pdf2018-12-17
Operation
Before starting
Battery isolation switch - On - Optional
3
2 1
Fig. Left side of engine
1. Battery disconnector
(only PLUS version)
2. Power socket, 12V
3. Cable lug
Remember to carry out daily maintenance. Refer to
the maintenance instructions.
PLUS version
The battery disconnector is located on the left side of
the engine compartment.
Turn the key (1) to the On position.
CC version
Fix the red cable lug (3) on the plus terminal on the
battery.
The roller is now supplied with power.
The engine cover must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary.
The engine cover must be unlocked when
operating, so that the battery can be quickly
disconnected if necessary.
Driver seat (CC version) - Adjustment
1
Fig. Operator's seat
1. Length adjustment
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted lengthways (1).
35
To Next Page
Loading...
Need help?
General
