Dynapac CC1000 User Manual

Operating instructions - Summary
4812160801_D.pdf2018-12-17
Operating instructions - Summary
1. Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.1. Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.
2. Make sure that all instructions in the MAINTENANCE section are followed.2. Make sure that all instructions in the MAINTENANCE section are followed.
3. Turn the master switch to the ON position.3. Turn the master switch to the ON position.
4. Move the forward/reverse lever to the NEUTRAL position.4. Move the forward/reverse lever to the NEUTRAL position.
5. Set the switch for Manual/Automatic vibration to the 0 position.5. Set the switch for Manual/Automatic vibration to the 0 position.
6. Set the engine speed control to full speed.6. Set the engine speed control to full speed.
7. Set the emergency stop in the pulled out position.7. Set the emergency stop in the pulled out position.
8. Start the engine and allow it to warm up.8. Start the engine and allow it to warm up.
9. Set the engine speed control to the operating position.9. Set the engine speed control to the operating position.
10. Drive the roller. Operate the forward/reverse lever with care.10. Drive the roller. Operate the forward/reverse lever with care.
11. Check the brakes, drive slowly. Remember that the braking distance will be
longer if the roller is cold.
11. Check the brakes, drive slowly. Remember that the braking distance will be
longer if the roller is cold.
12. Use vibration only when the roller is in motion.12. Use vibration only when the roller is in motion.
13. Check that the drums are thoroughly watered when watering is required.13. Check that the drums are thoroughly watered when watering is required.
14. IN AN EMERGENCY:
- Press the EMERGENCY STOP
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop. The engine stops.
14. IN AN EMERGENCY:
- Press the EMERGENCY STOP
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop. The engine stops.
15. Parking: - Stop the engine and chock the drums.15. Parking: - Stop the engine and chock the drums.
16. When lifting: - Refer to the relevant section in the Instruction Manual.16. When lifting: - Refer to the relevant section in the Instruction Manual.
17. When towing: - Refer to the relevant section in the Instruction Manual.17. When towing: - Refer to the relevant section in the Instruction Manual.
18. When transporting: - Refer to the relevant section in the Instruction Manual.18. When transporting: - Refer to the relevant section in the Instruction Manual.
19. When recovering - Refer to the relevant section in the Instruction Manual.19. When recovering - Refer to the relevant section in the Instruction Manual.
55

Dynapac CC1000 Specifications

General

Brand	Dynapac
Model	CC1000
Category	Construction Equipment
Language	English