Operation
4812160801_D.pdf2018-12-17
Driving
Operating the roller
2
6
3
1
Figure. Instrument panel
1. Starter switch
2. Engine speed control
3. Emergency stop
6. Forward/reverse lever
Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation.
Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation.
Make sure that the area in front of and behind the
roller is clear.
Make sure that the area in front of and behind the
roller is clear.
Release the parking brake (31) and check that the
parking brake lamp (25) goes off.
Turn the engine speed control upwards (2) and lock it
in the working position.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (12).
12
25
31
Figure. Instrument panel
12. Switch for sprinkler
25. Parking brake lamp
31. Parking brake
Carefully move the forward/reverse lever (6) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
The speed should always be controlled using the
forward/reverse lever and never by changing the
engine speed.
The speed should always be controlled using the
forward/reverse lever and never by changing the
engine speed.
Check when operating that the warning lamps do not
come on.
41
To Next Page
Loading...
Need help?
General
