EasyManuals Logo

Dynapac CC1000 User Manual

Dynapac CC1000
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Maintenance, 10h
4812160801_D.pdf2018-12-17
Maintenance, 10h
Every 10 hours of operation (Daily)
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Ensure that the engine cover is fully open when
work is carried out under the cover.
Ensure that the engine cover is fully open when
work is carried out under the cover.
Diesel engine Check oil level
Fig. Engine
1. Dipstick
2. Filler cap
1
2
Open the engine cover lock and lower the engine
cover forwards.
Check the oil level using the dipstick (1). The level
should be between the marks. If the level is near the
lower mark, top off with fresh engine oil via the filler
cap (2). See under the heading lubricants for the
correct oil grade.
Never overfill with oil, as this can damage the
engine.
Never overfill with oil, as this can damage the
engine.
71

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CC1000 and is the answer not in the manual?

Dynapac CC1000 Specifications

General IconGeneral
BrandDynapac
ModelCC1000
CategoryConstruction Equipment
LanguageEnglish

Related product manuals