Maintenance measures - 500 h
4812161201_F.pdf 2018-04-17
Check - Coolant system
Figure. Cooling water container
1. Filler cap
2. Level marking
1
2
Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Also check the freezing point. Change the coolant
every other year.
Also check the freezing point. Change the coolant
every other year.
Replacing the fuel filter
Fig. Engine compartment
1. Fuel filter
1
Place a container underneath to collect fuel that
runs out when the filter is released.
Place a container underneath to collect fuel that
runs out when the filter is released.
Screw off the fuel filter (1). The filter is of the
disposable type and cannot be cleaned. Hand in to a
waste disposal station.
Refer to the engine manual for detailed
instructions when replacing the fuel filter.
Refer to the engine manual for detailed
instructions when replacing the fuel filter.
Start the engine and check that the fuel filter is tight.
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
92
To Next Page
Loading...
Need help?
General
