Dynapac CC1300C User Manual

Operation
4812161201_F.pdf2018-04-17
Driving
Operating the roller
2
6
3
1
Figure. Instrument panel
1. Starter switch
2. Throttle control
3. Emergency stop
6. Forward/reverse lever
Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation.
Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation.
Make sure that the area in front of and behind the
roller is clear.
Make sure that the area in front of and behind the
roller is clear.
Release the parking brake and check that the parking
brake lamp goes off.
Turn the throttle control (2) in backward position.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (12).
41

Dynapac CC1300C Specifications

General

Brand	Dynapac
Model	CC1300C
Category	Construction Equipment
Language	English