Dynapac CC1300C User Manual

Introduction
4812161201_F.pdf2018-04-17
Introduction
The machine
Dynapac CC1300C is a self-propelled vibratory combi
roller in 4 metric tonnes class featuring a 1300 mm (51
in) wide drum and 1280 mm (50 in.) wide wheels. The
machine is equipped with drive and brakes both front
and rear and vibrations on front drum.
Intended use
The CC1300C is a small combi roller as are used for
compacting of thin layers and soft asphalt compounds.
The roller is mainly intended for smaller construction
works, such as compacting asphalt on minor roads,
sidewalks, cycle ways and garage driveways.
The four rubber wheels on the CC1300C gives the
asphalt a different surface structure, as sometimes
aim at in comparison with a vibrating tandem roller.
Warning symbols
WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.
WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.
CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.
CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.
Safety information
It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.
It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.
Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.
Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.
We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.
1

Dynapac CC1300C Specifications

General

Brand	Dynapac
Model	CC1300C
Category	Construction Equipment
Language	English