Maintenance - 2000h
4812161201_F.pdf 2018-04-17
Check - Coolant system
Figure. Cooling water container
1. Filler cap
2. Level marking
1
2
Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.
Also check the freezing point. Change the coolant
every other year.
Also check the freezing point. Change the coolant
every other year.
Replacing the hydraulic oil filter
1
1
Fig. Engine compartment
1. Retaining screws
2. Protective cover
1
2
Unscrew the retaining screws (1) on each side of the
roller.
Remove the protective cover (2).
110
To Next Page
Loading...
Need help?
General
