Maintenance - 2000h
4812161201_F.pdf 2018-04-17
Water tank - Cleaning
1
Fig. Water tank
1. Drain plug
Clean the tanks with water and a suitable detergent for
plastic surfaces.
Refit the filter housing or the drain plug (1). Fill with
water and check for leaks.
The water tanks are made of plastic
(polyethylene) and are recyclable.
The water tanks are made of plastic
(polyethylene) and are recyclable.
Emulsion tank - Draining
1
2
3
Fig. Pump system
1. Stop cock
2. Drain cock
3. Drain hose
Open the cock (1) and the drain cock (2), which is
located in the left step. The hose (3) facilitates draining
the emulsion fluid into a suitable receptacle.
When cleaning the tank, see Water tank - Cleaning.
The Emulsions tank is made of plastic
(polyethylene), and is recyclable.
The Emulsions tank is made of plastic
(polyethylene), and is recyclable.
116
To Next Page
Loading...
