Dynapac CC1300C User Manual

Maintenance - Maintenance schedule
4812161201_F.pdf 2018-04-17
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply.
The manufacturer’s instructions found in the
engine manual also apply.
Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel.
Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
Before starting up for the first time on that dayBefore starting up for the first time on that day
3 Clean the outside of the cooler package In dusty conditions when
necessary
3 Clean the outside of the cooler package In dusty conditions when
necessary
4 Check coolant level4 Check coolant level
6 Check the engine oil level Refer to the engine manual6 Check the engine oil level Refer to the engine manual
14 Check the hydraulic reservoir level14 Check the hydraulic reservoir level
3 Check for free circulation of cooling air3 Check for free circulation of cooling air
1 Fill the fuel tank1 Fill the fuel tank
7 Fill the water tank7 Fill the water tank
8 Check the sprinkler system/Drum8 Check the sprinkler system/Drum
9 Check the scraper setting/Drum9 Check the scraper setting/Drum
22 Check the spring loaded scrapers Optional22 Check the spring loaded scrapers Optional
21 Check the sprinkler system - tires21 Check the sprinkler system - tires
22 Check the scraper setting - tires22 Check the scraper setting - tires
19 Test the brakes19 Test the brakes
64

Dynapac CC1300C Specifications

General

Brand	Dynapac
Model	CC1300C
Category	Construction Equipment
Language	English