Dynapac CC1300C User Manual

Maintenance - Maintenance schedule
4812161201_F.pdf2018-04-17
After the FIRST 50 hours of operation
See Contents to find the page number of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
6 Change the engine oil and oil filter Refer to the engine manual6 Change the engine oil and oil filter Refer to the engine manual
6 Change the fuel filter Refer to the engine manual6 Change the fuel filter Refer to the engine manual
13 Change the hydraulic fluid filter13 Change the hydraulic fluid filter
10 Check bolted joints10 Check bolted joints
Every 50 hours of operation (Weekly)
See Contents to find the page numbers of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
4 Check indicator for air cleaner
Check that the air hoses are in good condition and
that the connections are tight
Optional4 Check indicator for air cleaner
Check that the air hoses are in good condition and
that the connections are tight
Optional
15 Grease the steering joint15 Grease the steering joint
16 Grease the steering cylinder brackets16 Grease the steering cylinder brackets
20 Check the tire pressure20 Check the tire pressure
Every 250 / 750 / 1250 / 1750 hours of operation
See Contents to find the page number of the sections
referred to!
Pos.
in fig
Action CommentPos.
in fig
Action Comment
5 Check the battery condition5 Check the battery condition
6 Change the engine oil and oil filter Refer to the engine manual6 Change the engine oil and oil filter Refer to the engine manual
65

Dynapac CC1300C Specifications

General

Brand	Dynapac
Model	CC1300C
Category	Construction Equipment
Language	English