EasyManua.ls Logo

Dynapac CC1300C - Maintenance - 250 Hour Tasks; Battery Condition Check

Dynapac CC1300C
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance, 10h
4812161201_F.pdf2018-04-17
Fuel tank - Filling
Fig. Fuel tank
1. Filler cap
1
Refuel every day before starting to work. Screw off the
lockable tank cap (1) and fill diesel fuel to the lower
edge of the filler pipe.
Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the roller
before refuelling, and against the filler pipe while
refuelling.
Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the roller
before refuelling, and against the filler pipe while
refuelling.
Never refuel while the engine is running. Do not
smoke and avoid spilling fuel.
Never refuel while the engine is running. Do not
smoke and avoid spilling fuel.
The fuel tank holds 50 liters.
Water tank - Filling
Fig. Water tank
1. Tank cap
1
Unscrew the tank cap (1) and fill with clean water.
Do not remove the strainer. See technical
specifications for the tank volume.
Unscrew the tank cap (1) and fill with clean water.
Do not remove the strainer. See technical
specifications for the tank volume.
Only additive: A small amount of
environment-friendly antifreeze.
Only additive: A small amount of
environment-friendly antifreeze.
75

Table of Contents

Related product manuals