Eaton DS7 - Page 22

1 Device series DS7
1.6 Checking the Delivery
18 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
The part no. on the nameplate indicates the specific DS7 soft starter version
corresponding to the unit.
In the figure below, the following letters are used to provide the following
information:
• x: Control voltage U
s
or U
c
• yyy: Rated operational current I
e
• z: Options / characteristics
The following table shows which instructional leaflets are meant for which
DS7 soft starter sizes:
Table 3: Instruction leaflet for soft starter series DS7
DS7-34 - x SX yyy N0- z
N = No Option
D = SmartWire-DT
I
e
U
s ,
U
c
0 = 24 V AC/DC
2 = 120/230 V AC
D = 24 V DC
U
e
≦ U
LN
:
200 - 480 VAC 3ph 50/60Hz
Figure 7: Nameplate and part no. position
M
Motor
U
LN
Mains
Instruction leaflet Construction
size
For device type Rated operational
current I
e
IL03902003Z
(previous designation AWA8250-2541)
BG1 DS7-34…SX004…
DS7-34…SX007…
DS7-34…SX009…
DS7-34…SX012…
004 = 4 A
007 = 7 A
009 = 9 A
012 = 12 A
IL03902004Z
(previous designation AWA8250-2542)
BG2 DS7-34…SX016…
DS7-34…SX024…
DS7-34…SX032…
016 = 16 A
024 = 24 A
032 = 32 A
IL03902005Z
(previous designation AWA8250-2543)
BG3 DS7-34…SX041…
DS7-34…SX055…
DS7-34…SX070…
DS7-34…SX081…
DS7-34…SX100…
041 = 41 A
055 = 55 A
070 = 70 A
081 = 81 A
100 = 100 A
BG4 DS7-34…SX135…
DS7-34…SX160…
DS7-34…SX200…
135 = 135 A
160 = 160 A
200 = 200 A