3 Installation
3.3 Flush mounting in control panel
76 DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
Figure 60: Fitting on mounting plate, DS7 soft starter (sizes 3 and 4)
Size 3 (up to 100 A)
① = 22.5 mm
② = 161 mm
Size 4 (up to 200 A)
① = 15 mm
② = 200 mm
Figure 59: Drilling dimensions
￫
The drilling dimensions will be different when using optional
device fan DS7-FAN-100 or DS7-FAN-200.
Refer to the dimension drawings on page 232.
Part no. mm inch Nm lb-in
DS7-34…SX041N0
DS7-34…SX055N0
DS7-34…SX070N0
DS7-34…SX081N0
DS7-34…SX100N0
2 x M5 x ≧ 55 4 0.16 9 80
DS7-34…SX135N0
DS7-34…SX160N0
DS7-34…SX200N0
2 x M6 x ≧ 65 5 0.2 14 123
To Next Page
Loading...
