9 Installation and start-up GLT x010 / SIOX
Among other things, the system centre is used for alarm signalling and operating data archiving and is the link
between the LDSWin PC software and the controller.
IMPORTANT SAFETY INSTRUCTIONS!
Before the installation and start-up of the controller, the chapter Safety instructions must be carefully
read in its entirety and all safety instructions and hazard warnings observed.
The controller can only be parametrised during start-up or later changes to its configuration via the
LDSWin PC software. The controller should only be used with compatible versions of LDSWin,
otherwise the scope of functions can be restricted.
Tip: The latest LDSWin version should always be used. Among other things, setpoints, actual values
and archived long-term data can also be visualised and evaluated in LDSWin.
Before the start-up of the system, the necessary hardware and software default settings which are
described in the following chapters must be made on the controller.
To Next Page
Loading...