Acclarix AX8/Acclarix AX7 Diagnostic Ultrasound System User Manual Exam Operation
- 29 -
4.4 The Patient Information Page
The Patient Information Page is used to enter or modify patient demographic data. The following
figure is an example:
Figure 4-3 Patient Information Page(OB Exam)
The top three lines are for entering the patient last name, first name, ID, exam accession number, and
DOB (Date-of-Birth) or age. If date of birth is entered, the age is automatically calculated.
Note:
By default, the patient name has two fields: family name and given name. It can be configured to be
one field in the Patient Setup screen (See section 11.1.2 for detail).
The next line shows the current transducer and the preset that will be used for the current exam. The
preset can be changed by clicking the drop-down menu and selecting another preset associated with
the current transducer.
The lines below the preset selection vary depending on the current preset and display fields that are
preset-specific. All the possible patient information fields you may need to fill in are listed below:
Gender: Select the patient’s gender: “M” (Male), “F” (Female), “O” (Other), or “<blank>”. “F” is
default for gynecology, obstetric and breast exams; “M” is default for prostate exam and testis
exam; <blank> is default for all other exam types.
LMP: Last Menstrual Period (yyyy/mm/dd or mm/dd/yyyy), If LMP is entered then GA and EDD
are calculated. Entering EDD does not impact LMP. An LMP more than 300 days ago is
To Next Page
Loading...
Need help?
General
