Acclarix AX8/Acclarix AX7 Diagnostic Ultrasound System User Manual Exam Data Management
- 130 -
9 Exam Data Management
9.1 Storing Images
The system supports storing static images and cine clips. What is displayed in Information area,
Image area and Image parameter area on the main screen will be stored.
The control panel has three store keys, as shown below:
Prints images via the connected USB video printer.
Each of these three keys can be separately configurable to support any of the following functions. See
section 11.1.3 for details.
Store a static image.
Store a clip.
Video print function
Store a static image to USB stick.
Store a clip to USB stick.
Storing an image:
Pressing a Store key on the console will always capture what is on the image area of the screen. This
includes live, frozen, or Cine images. It also includes reports or other GUI screens and review.
Storing a clip:
Pressing a Store key on the console will capture the moving images in scanning or cine review status.
If the image is frozen or a non-image screen is displayed then a static image is stored.
The store starts with the press of a Store key and continues for the configured length of the clip or until
the clip store is interrupted. The length of the clip can be configured on the Store/Print page (See
section 11.1.3 for details).
The following events can cause the clip store to stop:
A second press of the store key
Display of a GUI screen or dialog
Mode change
Image parameters change
Cine play pause
NOTE:
1. If the image is frozen or a non-image screen is displayed, a static image is always stored
when pressing a store key.
2. In panorama mode, a static image is always stored when pressing a store key.
To Next Page
Loading...
Need help?
General
