F15 Series Fetal & Maternal Monitor Service Manual Disassembling the Monitor
- 48 -
Chapter 9 Disassembling the Monitor
WARNING
1 Only qualified service personnel should open the monitor case.
2 Switch off the monitor and remove the AC power cable before disassembling the monitor.
3 After any repair of the monitor, perform safety tests before using the monitor again.
9.1 Tools Required
9.3 Disassembling the Main Unit
The main unit consists of two major parts: upper assembly and lower assembly.
1 – A cross-head screwdriver
2 – A flat-head screwdriver
3 – A M3 nut driver
4 – A pair of pliers
To Next Page
Loading...
