F15 Series Fetal & Maternal Monitor Service Manual Connecting to OB TraceVue System
- 68 -
Figure A2-5 Connecting DB9 and RJ45 interfaces of the OB TraceVue system
Setting
Set the Net Version of F15/F15Air to PHILIPS. (Refer to 5.8 Changing Net Version)
Restart F15/F15Air.
Validation
1) Switch F15/F15Air to Demo mode.
2) Observe the surveillance window of the OB TraceVue system. If data from F15/F15Air is
transferred to the system, the connection succeeds. Otherwise check the connection or try on
another interface of the system.
NOTE:
The identity number of this interface is preset. The device No. of F15/F15Air does not take effect in
this system.