EDAN M3 - Replacing the Battery; TEMP Monitoring with F3000 Module; General Information

M3 Vital Signs Monitor User Manual TEMP Monitoring (Optional)
- 77 -
10.2.4 Replacing the Battery
The device is supplied with one lithium cell CR2032x1.
To replacing the battery, follow the procedure:
1. Open the battery cover by inserting a pointed object into the battery cover pin hole;
meanwhile, use thumb to push battery cover out.
2. Hold the thermometer and flip the battery out with a small screwdriver.
3. Insert the new battery under the metal hook on the left side ① and press the right side ②
of the battery down until the it clicks in place.
WARNING
1 Keep the battery away from children.
2 Ensure the positive (+) side is up and the negative (-) side down.
10.3 TEMP Monitoring with F3000 Module
10.3.1 General Information
M3 with the F3000 module measures patient temperatures by oral, axillary or rectal means.
The monitor can only measure temperature of adult and pediatric patients. If the user measure
temperature of neonate patient, the monitor will not display data.
The electromagnetic compatibility of this device has been verified by test according to the
EN60601-1-2: 2015 requirements.