EDAN SE-1201 - Setup 2

SE-1201 Electrocardiograph User Manual System Setup
- 94 -
10.4.2 Setup 2
Press F2 to switch to the Setup 2 window.
Figure 10-5 Record Info Setup2
Item Description
Auto Record Info
Select Position Marker, Analysis, Template, Measure or Minnesota
Code, the item will be printed in the ECG reports.
Choose Auto or Horizontal from the Baseline Adjustment list box
Select Auto, the baselines of the lead groups are adjusted respectively.
Select Horizontal, the baselines of the lead groups are adjusted
simultaneously, and the baselines of the leads in the same row are on the
same line.
Auto Record Info
NOTE:
1. The items of Auto Record Info are available only in the auto
mode, and Template and Position Marker do not work in the
Save Paper mode.
2. To get more information about the above contents, please refer
to Section 6.5.1, “ECG Reports in the Auto Mode”.
RR Record Info
Select RR Interval List, the item will be printed in the ECG reports.
Grid of Report
Select Thermal Report, the grid will be printed while printing ECG
reports with the thermal recorder.
Select USB Report, the grid will be printed while printing ECG reports
with a USB printer.