SE-1201 Electrocardiograph User Manual Printing ECG Reports
- 47 -
Chapter 6 Printing ECG Reports
NOTE:
1. The working mode can not be changed during the printing course. Stop printing
reports before changing the working mode.
2. Within three seconds after returning to the main screen, if you press the PRINT/STOP
key to print an ECG report in the auto quick mode or the manual mode, the recorder
will not respond.
3. In the auto, rhythm or R-R mode, if Paper Maker is set to Yes in the Setup1 window,
pressing
the PRINT/STOP key can stop printing an ECG report and start detecting the
black marker, pressing
the PRINT/STOP key again can stop advancing the paper. If
Paper Maker is set to No in the Setup1 window, pressing the PRINT/STOP key can
stop printing an ECG report and advancing the paper immediately.
6.1 Printing an ECG Report
6.1.1 Auto Mode
Operation Method:
1. To set Mode Options, Auto DispStyle, Sampling Mode, Record Style, Rhythm Lead1/2/3,
or Lead Sequence (Optional)
1) Select AUTO from the Mode Option list in the Work Mode Setup window.
2) Select a style from the Auto DispStyle list in the Work Mode Setup window.
3) Select a mode from the Sampling Mode list in the Work Mode Setup window
4) Select a style from the Record Style list in the Record Info Setup window.
5) Select a lead from the Rhythm Lead1/2/3 list in the Lead Setup window.
6) Select a sequence from the Lead Sequence list in the Lead Setup window.
7) Press Enter to confirm.
To Next Page
Loading...
