SE-1201 Electrocardiograph User Manual Managing Files
- 78 -
CAUTION
It is forbidden to connect or disconnect a U disk, an SD card or a USB printer during the
transmission course.
NOTE:
1. Please insert the U disk or SD card recommended by the manufacturer. Please set
the format to FAT or FAT32 when formatting the U disk or SD card.
2. X in the directory of ECGDATA\ECG-X\Export\Export Date and Time can be set in
the Device No. textbox in the Transmission Setup window.
3. If you select Delete After Trans. Or Export in the File Setup window, the files will be
deleted from the File Manager screen after they are exported.
9.3 Deleting Files
Pressing Del All on the File Manager screen1 can delete all the files from the electrocardiograph.
Or, you select a file on the File Manager screen1, and then press Select to display the File
Manager screen2. Select Delete on the File Manager screen2, and then press Enter to delete the
selected file from the electrocardiograph.
9.4 Searching Files
Select Search on the File Manager screen1 to display the following window.
Select the search type, such as ID, Name, Time, enter the search information, and then press
Enter to confirm. All the files which meet the requirements will be searched and displayed on the
File Manager screen.
NOTE: The time mode in the SearchInfo Setup window is the mode you select in the
Date & Time Setup window.