EDAN SE-1201 - Appendix 1 Technical Specifications; A1.1 Safety Specifications

SE-1201 Electrocardiograph User Manual EMC Information
- 125 -
Appendix 2 EMC Information
Guidance and manufacture’s declaration - electromagnetic emissions-
for all EQUIPMENT and SYSTEMS
Guidance and manufacture’s declaration – electromagnetic emission
The 12-channel electrocardiograph is intended for use in the electromagnetic environment
specified below. The customer or the user of the 12-channel electrocardiograph should
assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The 12-channel electrocardiograph uses RF
energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
RF emission
CISPR 11
Class A
Harmonic
emissions
IEC/EN 61000-3-2
Class A
Voltage
fluctuations/ flicker
emissions
IEC/EN 61000-3-3
Complies
The 12-channel electrocardiograph is
suitable for use in all establishments, other
than domestic and those directly connected
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.