EDAN SE-1201 - 9.5 Importing Files; 9.6 Editing Patient Information; 9.7 Printing Files

SE-1201 Electrocardiograph User Manual Managing Files
- 79 -
9.5 Importing Files
Operation procedures are as follows:
1. Connect the U disk or SD card recommended by the manufacturer to the electrocardiograph.
2. Save files to the directory of ECGDAT\Import of the U disk or SD card.
3. Select File on the main screen2 to open the File Manager screen1.
4. Select Import on the File Manager screen1 to import files from the directory of
ECGDAT\Import of the U disk or SD card to the electrocardiograph.
NOTE: Only the ECG files in DAT format produced by the electrocardiograph of the
manufacturer can be imported.
9.6 Editing Patient Information
Press Select on the File Manager screen1 to display the File Manager screen2, and then select
Edit to open the Patient Information window.
NOTE: The Address item can be defined in the User-defined text box in the Patient
Information Setup window. For details, please refer to Section 10.5 “Patient
Information Setup”.
For details on inputting data, please refer to Section 4.1.2, “Entering Data”.
9.7 Printing Files
You can press PRINT/STOP on the File Manager screen1/2 or the preview screen to print ECG
reports. For details, please refer to Section 6.4 “Printing a Stored ECG Report”.