EDAN SE-1201 - 7.2 Real-time Transmission to PC ECG

SE-1201 Electrocardiograph User Manual Transmitting ECG Data
- 69 -
4. In the auto or rhythm mode, ECG data will be transmitted through the net cable
automatically after an ECG report is printed out. In the off mode, 10s ECG data sampled
after pressing the PRINT/STOP key will be transmitted through the net cable automatically.
7.2 Real-time Transmission to PC ECG
NOTE: For the real-time transmission, the PC ECG software of the manufacturer must be
installed in the PC.
1. Run the PC ECG software and configure it for the real-time transmission.