SE-1201 Electrocardiograph User Manual System Setup
- 98 -
Item Description
FTP Information
Enter data in the FTP Path, FTP User Name textboxes.
IP Addresses
Set Server IP, Local IP, Set Gateway, Set Subnet Mask
For details, please refer to Section 7.1.1 “Transmitting ECG Data in DAT
Format through Ethernet Cable”.
10.7 Lead Setup
Select Lead on the System Setup screen, and press Enter to open the Lead Setup window.
Figure 10-8 Lead Setup Window
Item Description
Rhythm Lead1/2/3
Choose from: І, П, Ш, aVR, aVL, aVF, V1, V2, V3, V4, V5, or V6
In the auto mode:
When Record Style is set to 3×4+1R or 6×2+1R, the rhythm lead
selected in the Rhythm Lead1 list box will be printed in the ECG reports;
When Record Style is set to 3×4+3R, 3 rhythm leads selected
respectively in the Rhythm Lead1/2/3 list box will be printed in the ECG
reports.
In the rhythm mode:
When Rhythm Style is set to Single Lead, 60s wave of the rhythm lead
selected in the Rhythm Lead1 list box will be printed in the ECG reports;
When Rhythm Style is set to Three Leads, 20s waves of three rhythm
leads selected respectively in the Rhythm Lead1/2/3 list box will be
printed in the ECG reports.
To Next Page
Loading...
