EDAN SE-1201 - 10.9 Date&Time Setup

SE-1201 Electrocardiograph User Manual System Setup
- 101 -
10.9 Date&Time Setup
Select Date&Time on the System Setup screen, and press Enter to open the Date&Time Setup
window.
Figure 10-10 Date &Time Setup Window
NOTE: Please set DATE&TIME correctly when it’s the first time you use the
electrocardiograph.
Item Description
Date&Time Input the date or the time manually, the time will be displayed on the main
screen, and the date and the time will be printed in the ECG reports.
Date Mode
Choose from: DD-MM-YYYY, MM-DD-YYYY or YYYY-MM-DD
NOTE: Select OK in the Date&Time Setup window or press Enter
to confirm. Then the new setup will become effective.
Time Mode
Choose from: 24 Hours or 12 Hours
Power Off Time Input the power-off time manually.
If you enter 0 Minutes or nothing, this function will not be effective.
NOTE:
1. Power-off time is counted from the time when you last press the
keys on the keyboard.
2. Only when the device is powered by the battery, can the set
automatic power-off time be effective.
LCD off Time Input the LCD off time manually.
If you enter 0 Minutes or nothing, this function will not be effective.
NOTE: LCD Off time is counted from the time when you last press
the keys on the keyboard.