SE-1201 Electrocardiograph User Manual Entering Patient Information
- 43 -
Chapter 5 Entering Patient Information
5.1 Entering Patient Information Manually
Operation procedures are as follows:
1. Configure the Patient Information Setup window. (Optional)
1) Select the desired items.
Select the desired items in the Patient Information Setup window, and then press Enter
to confirm. For details, please refer to Section 10.5 “Patient Information Setup”.
2) Select a mode from the ID list box.
For details, please refer to Section 10.5 “Patient Information Setup”.
3) Press Enter to confirm.
2. Select Patient on the main screen1 to open the Patient Information window.
3. Enter data in a desired textbox.
4. Press Enter to confirm or press Esc to return to the main screen.
To Next Page
Loading...
