EDAN SE-1201 - 10.11 System Maintenance Setup

SE-1201 Electrocardiograph User Manual System Setup
- 104 -
10.11 System Maintenance Setup
Select Maintenance on the System Setup screen, and press Enter to open the System
Maintenance window.
Figure 10-12 System Maintenance Window
Item Description
Export Settings Press to export the system settings to the U disk or SD card
Import Settings
Press to load the system settings from the U disk or SD card to the
electrocardiograph.
Back up Settings Press to back up the system settings to the ECG.
Load Backup
Settings
Press to load the backup settings from the ECG.
Record System
Settings
Press to print the system settings.
Pressing this button again can stop printing system settings.
System Password Enter the password.
If you set the system password, after you press F1 below Setup on the
main screen2, the System Password window will pop up. After you enter
the correct password, the System Setup screen will be displayed.
Load Factory
Settings
Press
to restore the factory settings.