SE-1201 Electrocardiograph User Manual Introduction
- 9 -
Chapter 2 Introduction
SE-1201 gathers ECG signals of 12 leads simultaneously. It displays the operation menu, ECG
parameters as well as electrocardiograms.
The 12-channel ECG waves can be viewed on the LCD screen and printed out by using a
high-quality thermal recorder. The sampled ECG data can be saved, transmitted and exported.
The manual, auto, rhythm, R-R analysis or off mode can be chosen freely.
SE-1201 can be powered by the mains supply or the battery.
With a high resolution thermal recorder, a 32-bit processor and a large-capacity memorizer,
SE-1201 has advanced performance and high reliability. The compact size makes it suitable for
clinic and hospital uses.
SE-1201 adopts 800×480 multicolor LCD screen.
Configuration: main unit, power cord, patient cable, chest electrodes, limb electrodes, disposable
electrodes, alligator clips, thermal recorder paper, fuses, battery.
NOTE: The pictures and windows in this manual are for reference only.
2.1 Top Panel
Figure 2-1 SE-1201
Keyboard
LCD Screen
Recorder
Indicators
From left to
right on the top
panel: A, B, C.
To Next Page
Loading...
